dash cover/Bezel quick repair
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: york sc
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
dash cover/Bezel quick repair
After my failed attempts of buying a low priced used bezel cover off ebay, not spending $100 on use 20 year old plastic . I visited the local junk yard and found only broken covers , so I snapped some plastic off the one I found laying on the ground and made patches for my cover, cut and applied epoxy . Turned out great just need to drill and paint
#3
Senior Member
Looks great! I had something similar with mine but I just used a large rubber washer around the screws and its been holding together. I covered the trim pieces with wood grain vinyl to make them look a little nicer (love your blue flames!). I put a clock in mine too while I had it apart. Couldn't see the LEDs on the radio!
#4
Junior Member
Thread Starter
Join Date: Jul 2015
Location: york sc
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I had to redo the entire interior. Since the last owner just yanked off the cover all the anchors were destroyed and plastic was to brittle weld . I hydro dipped the trim. I know about your radio issue , I've got the same jvc . Nice touch on the clock btw ,
Before ,
After
Before ,
After
#6
Senior Member
Thanks, I had to redo the entire interior. Since the last owner just yanked off the cover all the anchors were destroyed and plastic was to brittle weld . I hydro dipped the trim. I know about your radio issue , I've got the same jvc . Nice touch on the clock btw ,
Before ,
After
Before ,
After