Topic Sponsor

Running Board Tube Mounts

Old 03-01-2016, 12:51 PM
  #1  
Senior Member
Thread Starter
 
24willyboy's Avatar
 
Join Date: Mar 2016
Posts: 133
Received 21 Likes on 14 Posts
Default

I've got a '95 F150 Flareside and it's a pretty solid old truck, checked all the underbody and couldn't find a single bit of rust, EXCEPT for the tubular mounts on the side running boards. Both sides are completely rusted out and were only being held on by the two bolts on each end of the actual fiberglass pieces. I had to take them off to avoid one of them falling off going down the road they were so far gone! These are the factory pieces and I cannot find any of the tube mounts for these things ANYWHERE. Anyone know where I could find some?
Attached Thumbnails Running Board Tube Mounts-image-2688722621.jpg   Running Board Tube Mounts-image-373695254.jpg  

Last edited by 24willyboy; 03-02-2016 at 07:59 AM.
Old 03-07-2016, 04:42 PM
  #2  
Senior Member
 
Ol' Blue ohio's Avatar
 
Join Date: Jan 2016
Posts: 434
Received 22 Likes on 22 Posts
Default

Just a observation but those look just like the lund brand side step might have some luck looking how those mount?
Old 03-07-2016, 04:45 PM
  #3  
Senior Member
iTrader: (1)
 
Chris_1's Avatar
 
Join Date: Mar 2014
Location: Ontario, Canada
Posts: 5,811
Received 708 Likes on 671 Posts

Default

Those brackets ALL rust out - bad design and I haven't heard of anyone who sells them. Most guys end up doing a custom fabrication.
Old 03-13-2016, 05:31 PM
  #4  
Senior Member
 
icecold's Avatar
 
Join Date: Dec 2013
Location: Southern California
Posts: 219
Received 21 Likes on 20 Posts

Default

This has been discussed several times, you would think someone with good fab skills would make some for sale
Old 03-14-2016, 10:27 AM
  #5  
Senior Member
Thread Starter
 
24willyboy's Avatar
 
Join Date: Mar 2016
Posts: 133
Received 21 Likes on 14 Posts
Default

I thought the same thing, however I was kinda thinking a muffler shop might could bend some slightly bigger stainless to match the factory shape? I was hoping someone would know where to find them but I guess I'll end up having to have some made lol. Thanks for the feedback!
Old 03-31-2016, 12:50 AM
  #6  
Senior Member
 
BAMAGRAD1995's Avatar
 
Join Date: Dec 2013
Location: Chelsea AL
Posts: 135
Received 9 Likes on 8 Posts
Default

Look in salvage yards in the dessert areas of the U.S. Things stay PRISTINE out there due to zero humidity and very little rain that's where I got mine. Just look for trucks being parted out on Craigslist in that area of the U.S. Happy hunting.
Old 11-14-2016, 12:12 PM
  #7  
Junior Member
 
jh_flareside's Avatar
 
Join Date: Jun 2016
Location: Longview, Texas
Posts: 8
Received 2 Likes on 2 Posts

Default

Late reply sorry. Not sure if you found an answer but I have these saved for a future maybe on my truck.

http://shop.broncograveyard.com/1992...uctinfo/35510/

They asking 500 bucks for the pair though and I don't know if I am willing to pay that price.
Old 11-15-2016, 08:59 AM
  #8  
Senior Member
Thread Starter
 
24willyboy's Avatar
 
Join Date: Mar 2016
Posts: 133
Received 21 Likes on 14 Posts
Default

Originally Posted by jh_flareside
Late reply sorry. Not sure if you found an answer but I have these saved for a future maybe on my truck.

http://shop.broncograveyard.com/1992...uctinfo/35510/

They asking 500 bucks for the pair though and I don't know if I am willing to pay that price.
Yeah I don't think I'd ever pay $500 for a set of tube mounts. I just used zip ties and magic and mine are staying on fine for now lol. I mean it's not really serving much purpose other than looking good because my Flareside didn't look right to me without them.
Old 11-15-2016, 05:42 PM
  #9  
Senior Member
iTrader: (1)
 
Chris_1's Avatar
 
Join Date: Mar 2014
Location: Ontario, Canada
Posts: 5,811
Received 708 Likes on 671 Posts

Default

Originally Posted by jh_flareside
Late reply sorry. Not sure if you found an answer but I have these saved for a future maybe on my truck.

http://shop.broncograveyard.com/1992...uctinfo/35510/

They asking 500 bucks for the pair though and I don't know if I am willing to pay that price.
That's probably 500 US too. I had a set show up here, came off a Bronco from Florida. I'm thinking I'll sell them for 300 - CDN. If I don't just keep them; I tend to hoard mint parts. It's a sickness, I know.
Old 11-18-2016, 07:52 AM
  #10  
Senior Member
Thread Starter
 
24willyboy's Avatar
 
Join Date: Mar 2016
Posts: 133
Received 21 Likes on 14 Posts
Default

Originally Posted by Chris_1
That's probably 500 US too. I had a set show up here, came off a Bronco from Florida. I'm thinking I'll sell them for 300 - CDN. If I don't just keep them; I tend to hoard mint parts. It's a sickness, I know.
Oh trust me, you aren't the only one! I've got a blue steering wheel and column from another OBS Ford that I bought just because it was in good shape haha. I have no need for it (especially since it's a blue steering wheel and my interior is black and grey) but I got it anyway lol.

Thread Tools
Search this Thread
Quick Reply: Running Board Tube Mounts



All times are GMT -4. The time now is 03:04 AM.