Front Crossmember broken 1995 F150 4x4
12-30-2015, 03:54 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Front Crossmember broken 1995 F150 4x4
Can someone tell me the compatible models for the 1995 F150 4x4 5.0 HO as far as the front crossmember is concerned? And can this be swapped out without completely pulling the engine? Any help is greatly appreciated. I love this truck, everything else about it is strong and beautiful. (Crossmember was being torqued due to a bent wheel assembly control arm - that's been replaced recently. Now I'm trying to find a compatible crossmember.) Thanks in advance!
12-30-2015, 07:22 PM
#2
92 to 96 should be a match for sure. Maybe earlier years, but they did change the front of the frame (crumple zones) so the c/m could possibly be different.
Look for a V8 crossmember rather than I6 - they're the same basically, but the motor mounts are totally different.
Look for a V8 crossmember rather than I6 - they're the same basically, but the motor mounts are totally different.
12-31-2015, 07:59 AM
#4
Bronco should match up, F250 I would think No. I believe the frame is bigger.
You should be able to use a 2WD c/m. I never checked if they're different, but everything bolts right up for a 2wd to 4x4 swap.
You should be able to use a 2WD c/m. I never checked if they're different, but everything bolts right up for a 2wd to 4x4 swap.
Last edited by Chris_1; 12-31-2015 at 08:02 AM.
