hard clutch won't move just replaced the master cylinder
05-25-2015, 12:47 AM
#1
Junior Member
Thread Starter
Join Date: May 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
hard clutch won't move just replaced the master cylinder
Backing out of the driveway the other day and the clutch push rod broke, no big deal just replace the clutch master cylinder. So I did. Now my clutch pedal will not go down with everything bolted back on. Not to sure where the problem lies. 1996 f150 Inline 6 5speed 4x4. Someone help please.
05-25-2015, 12:57 AM
#2
Senior Member
Start by going back under there and looking at everything to make sure it's hooked up properly. I think they are a self bleeding system, but you should make sure there isn't anything in the line blocking flow.
05-25-2015, 02:24 AM
#3
Junior Member
Thread Starter
Join Date: May 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I made sure there was no obstructions in the new master cylinder and I removed the rubber plug where the hydraulic line goes, I even made sure the little rubber washer was seated in its place... I'm really lost