Bleeding clutch system
03-24-2015, 10:27 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Bleeding clutch system
I have a 94 f150 300 4.9 6 cyl. how can i bleed the clutch after replacing the clutch master with a internal slave. I'm not seeing the bleeder valve? 
Last edited by RichGuam; 03-27-2015 at 07:52 PM.
03-25-2015, 12:17 PM
#2
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Bleeder Valve Found
The bleeder valve won't be seen by eye. It is located just above where the inlet line goes into the bell housing. Like many mechanical applications it will be found by feel. It shoud have a little rubber cover on it. I will try to post a picture later
Last edited by RichGuam; 03-25-2015 at 12:20 PM. Reason: miss spelling
03-27-2015, 08:02 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
update
remove fluid line to transimion with proper tool press fitting valve like a valve steam till fluid runs out re-install line and pump up clutch it will self bleed.
dont forget to fill master first and check the fluid level as you cmplete the above.
dont forget to fill master first and check the fluid level as you cmplete the above.
