Auto Hubs to Manual
11-05-2014, 12:52 PM
#1
Auto Hubs to Manual
Okay here we go! I have a 94 F150 5.0 EAOD with auto hubs with 5 screws on the cap. I am reading about three different types, 3, 5, and 6.
Starting from the inner to outer, Seal, inner bearing, race, race, outer bearing, lock nut, washer, another lock nut, inner spline spacer washer, c clip and then the auto hub assy, My question is in order to convert to manual locking hubs, what do i need either MM or WARN, and what do I keep? Truck is used strickly on road for weather in the winter and towing a trailer, probably will never see off road. Thanks for any assistance in this matter.
Starting from the inner to outer, Seal, inner bearing, race, race, outer bearing, lock nut, washer, another lock nut, inner spline spacer washer, c clip and then the auto hub assy, My question is in order to convert to manual locking hubs, what do i need either MM or WARN, and what do I keep? Truck is used strickly on road for weather in the winter and towing a trailer, probably will never see off road. Thanks for any assistance in this matter.
The following users liked this post:
pagmanofidaho (11-06-2014)