Topic Sponsor

1995 Ford F-150 XLT 4.9l 5 speed rolling backward

Thread Tools
 
Search this Thread
 
Old 03-22-2015, 08:35 PM
  #1  
Junior Member
Thread Starter
 
Tpec21's Avatar
 
Join Date: Feb 2015
Posts: 2
Received 0 Likes on 0 Posts
Default 1995 Ford F-150 XLT 4.9l 5 speed rolling backward

I have a 1995 f150 xlt with a 4.9 manual, I parked it on a slight hill in 1st gear and it started creeping down it. Dont know if its clutch but just put a new one in. I also dont know if theres suppose to be anything covering between the yoke of the drive shaft and the transmission but it is dripping fluid slowly.
Old 03-22-2015, 08:43 PM
  #2  
Senior Member
 
Manuellabour247's Avatar
 
Join Date: Nov 2013
Location: Kansas
Posts: 4,059
Received 394 Likes on 361 Posts

Default

Is your emergency brake disabled/inoperable?
The following users liked this post:
Tpec21 (03-24-2015)
Old 03-22-2015, 08:53 PM
  #3  
WindowGuy
 
jkenprice1's Avatar
 
Join Date: Dec 2012
Location: Indianapolis
Posts: 1,323
Received 153 Likes on 135 Posts

Default

That happens with a manuel trans because there is no internal locking mechanism like on an auto. IMO, your clutch didn't slip. Probably your engine turned. Gotta use parking brake. Even a wheel chock if you have it loaded.
The following users liked this post:
Tpec21 (03-24-2015)
Old 03-22-2015, 09:23 PM
  #4  
Senior Member
iTrader: (1)
 
Chris_1's Avatar
 
Join Date: Mar 2014
Location: Ontario, Canada
Posts: 5,811
Received 708 Likes on 671 Posts

Default

There's supposed to be a rear seal where the driveshaft goes in to the tail of the trans. Is it missing or damaged/ worn out maybe ?
The following users liked this post:
Tpec21 (03-24-2015)
Old 03-23-2015, 06:31 PM
  #5  
Junior Member
Thread Starter
 
Tpec21's Avatar
 
Join Date: Feb 2015
Posts: 2
Received 0 Likes on 0 Posts
Default

the seal is there i just didnt know in anything is suppose to cover it



Quick Reply: 1995 Ford F-150 XLT 4.9l 5 speed rolling backward



All times are GMT -4. The time now is 12:06 AM.