1993 Bronco shifts at ~3000rpm at WOT
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: NE Nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1993 Bronco shifts at ~3000rpm at WOT
I was wondering if anyone could provide some insight related the issue I am having with my transmission.
The transmission shifts up at around 3000 rpm when at wide open throttle. It will generally not shift down when you go to wide open throttle.
I can get it to 4000rpm+ shifting it manually. It seems to operate fine other than not being able to get past 3000rpm.
Not sure where to start looking. Electrical/control, solenoids, linkage???
Thank you
The transmission shifts up at around 3000 rpm when at wide open throttle. It will generally not shift down when you go to wide open throttle.
I can get it to 4000rpm+ shifting it manually. It seems to operate fine other than not being able to get past 3000rpm.
Not sure where to start looking. Electrical/control, solenoids, linkage???
Thank you
#2
I was wondering if anyone could provide some insight related the issue I am having with my transmission.
The transmission shifts up at around 3000 rpm when at wide open throttle. It will generally not shift down when you go to wide open throttle.
I can get it to 4000rpm+ shifting it manually. It seems to operate fine other than not being able to get past 3000rpm.
Not sure where to start looking. Electrical/control, solenoids, linkage???
Thank you
The transmission shifts up at around 3000 rpm when at wide open throttle. It will generally not shift down when you go to wide open throttle.
I can get it to 4000rpm+ shifting it manually. It seems to operate fine other than not being able to get past 3000rpm.
Not sure where to start looking. Electrical/control, solenoids, linkage???
Thank you
#3
Junior Member
Thread Starter
Join Date: Apr 2010
Location: NE Nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply!! It will rev past 3k fine if you shift manually. It runs good. Just wont rev out in drive. Looking like solenoid pack. I will post up after I get the parts in.
Thanks again!
Thanks again!
#4
Oh I missed that when reading before. Yeah probably not clogged cat. Yeah a solenoid somewhere makes sense
#5
Mark
iTrader: (1)
Tps ??