help I.D. this lift
03-04-2015, 06:45 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
help I.D. this lift
so i bought this 95 f150 with a lift already on it. it has issues i know i need to replace the front springs but i dont know if i have a 4 or 6 inch lift can anyone help my id this lift so i can get springs does anyone have any idea why the front pass spring is so bowed out? is it just old and wore out or should i be looking into something else?
Last edited by 95f150jjranch; 03-04-2015 at 08:04 PM.
03-04-2015, 08:56 PM
#4
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
well i just bought some pro comp 6 inch lift spring off ebay hopefully they fit if not can the coils be cut to fit or will what screw up the way the coils are clocked in the top and bottom spring buckets?
03-04-2015, 09:41 PM
#5
Junior Member
Thread Starter
Join Date: Mar 2015
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
i am trying to cancel my order now due to looking at this type of spring i dont think it can be cut to fit due to how its held in the buckets. i would be very thankful for any advice on what i might have or how to find out
03-04-2015, 10:38 PM
#6
The lift block in the back may be the best way to tell. 4x4's came with a l/b that was 1 1/2 or 2". How much more than that is your block ?
I think the stock 4x4 wheel well lip height is about 34" in the front. I don't remember that for sure, but that's what I seem to recall.
I think the stock 4x4 wheel well lip height is about 34" in the front. I don't remember that for sure, but that's what I seem to recall.
Trending Topics
03-07-2015, 06:42 PM
#8
Senior Member
I believe most 4" and 6" lifts use the same axle pivot drop brackets just different holes, atleast that's how mine is. Top hole is for a 4" and bottom is 6"
And no don't cut the springs.
And no don't cut the springs.