Hs981

1993 F-150, 4WD, extended cab, 6.5 foot bed. Currently running 31's stock but theyre bald now and in need of some replacin. Looking to paint/fix rust holes on wheel wells/lift/tire before winter starts. Althought I am weary of painting before winter, I don't want another harsh cold winter on the rust.

Anyways, would a 1.5 inch leveling kit allow me to fit 33's? I don't want to rub radius arms (runing 10.5x15s as I heard they wont on bigger tire sizes). I don't mind trimming the bumper as I plan on getting a custom one with pusher bars/wench/the whole deal eventually. (But I don't want to chop it in half obviously).
Thanks in advance!

5.0V8

I have a 1994 4x4, long bed, single cab with a 2 inch leveling kit. I just switched from 29x9.5x15 to 33x12.50x15 and they do rub on the radius arm at about 90% turn. I didn't have to cut my bumper but that might be because the bumper is just a little bit bent .

notsosporty98

No leveling kit in my 93 4x4 and I was able to fit 33s. Rub at full lock, and during maximum articulation. The truck was in an accident before so my bumper is out of position in many ways so it doesn't rub on there

notsosporty98

Actually, now that I think of it I never saw one rub mark on my radius arms. I think it was just rubbing on the fender liner

94FordI6

I had a 2" leveling kit along with 15x8 rims, I rubbed the radius arms and my bumper with 33x12.5 although they were really aggressive and it was the side lugs rubbing.

Tristin

I ran 33/12.50/15 with stock height in front only rubbed on radius arms but any 12.50 is gonna rub unless you get offset rims, i put a 6 inch lift on mine and they still rub

Tristin

and they were brand new mts

Lowrance

I rub on 32's with a 2" lift on stock wheels. Could be the valence, but eache vehicle is a little different. Especially with our vehicles being almost 20+ years old.

Tristin

33s stock height

Southernblues

I have 35,s on my 95 2WD. I have a 2" level kit and 3 " body lift