1988 f150 lariat 4x4 drum to disc conversion
04-21-2014, 10:03 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1988 f150 lariat 4x4 drum to disc conversion
Hi all,
Its time to replace a few parts in the brake system in my 88 like the master cylinder and one of the brake lines so I'm looking in to upgrading the whole system while I'm at it. One thing I'm looking at is converting the rear drums to discs. After doing some research I think I might need to get a master cylinder with a larger tank to allow more flow required by the calipers and remove a pressure regulator valve feeding to the rear. My question is, does anyone have experience with this or advice?
Its time to replace a few parts in the brake system in my 88 like the master cylinder and one of the brake lines so I'm looking in to upgrading the whole system while I'm at it. One thing I'm looking at is converting the rear drums to discs. After doing some research I think I might need to get a master cylinder with a larger tank to allow more flow required by the calipers and remove a pressure regulator valve feeding to the rear. My question is, does anyone have experience with this or advice?
04-21-2014, 10:08 PM
#2
Senior Member
Sub'd