fuel vaper mangement valve hose problems
02-16-2014, 03:08 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
fuel vaper mangement valve hose problems
hi all
i need help 1996 5.8 w
the small curved hose coming out of the throttle body nipple on the front passenger side of the throttle body has rotted and now have a vacuum leak , and needs to be replaced its a 1/4 inch on one end and goes to 5/16 on the other end and that goes to a plastic tube that goes to the fuel vaper mangement valve cannester ?, the problem is that the small preformed hose is obsolete from ford , and no longer avalable
has any one had this problem before and how did they fix it ? also i think the hose was made of silcone it gets very hot !
or can i just plug the nipple on the throttle body
i need help 1996 5.8 w
the small curved hose coming out of the throttle body nipple on the front passenger side of the throttle body has rotted and now have a vacuum leak , and needs to be replaced its a 1/4 inch on one end and goes to 5/16 on the other end and that goes to a plastic tube that goes to the fuel vaper mangement valve cannester ?, the problem is that the small preformed hose is obsolete from ford , and no longer avalable
has any one had this problem before and how did they fix it ? also i think the hose was made of silcone it gets very hot !
or can i just plug the nipple on the throttle body
Last edited by bullwhip; 02-16-2014 at 03:12 PM.
