302 to 306 build up
#1
Senior Member
Thread Starter
302 to 306 build up
Im planning to build a 302 for my 92 f150 with:
.30 over bore
Comp 31-255-5 SD safe cam
Ported stock heads
Ported upper and lower intake manifold
BBK throttle body
Long tube headers
Crane HI s6 ignition
My questions are
Will the stock speed density handle these mods
Will the stock injectors fuel it
Annnddd of course how much power do you think it'll make any help, information, or advice is appreciated
.30 over bore
Comp 31-255-5 SD safe cam
Ported stock heads
Ported upper and lower intake manifold
BBK throttle body
Long tube headers
Crane HI s6 ignition
My questions are
Will the stock speed density handle these mods
Will the stock injectors fuel it
Annnddd of course how much power do you think it'll make any help, information, or advice is appreciated
Last edited by wwerner; 05-12-2016 at 06:19 PM.
#2
Senior Member
iTrader: (1)
Not going to turn it into a fire breathing tire burner but you should notice a solid difference from a 23 year old stock tired engine for sure.
Nothing real radical there, so as long as the cam is set up for s/d (you need to maintain vacuum), the rest of the system should be able to handle it.
Nothing real radical there, so as long as the cam is set up for s/d (you need to maintain vacuum), the rest of the system should be able to handle it.
#3
Senior Member
Thread Starter
Thanks I just wanted to check since the speed density Is so finicky with change and I figured while I rebuild the old motor I could throw a couple odds and ends at it.