oil pan gasket
#2
member
If yours is a 4.9liter you can romove the egr valve unloosen the top half
Fan shroud. Then take the motor mounts and then the trans mount loose.
Then take the dust cover off the tranny and tben remove the starter. Then
you can jack the front of the motor up. Then remove the oil pan.
I haven done a v-8 in the truck. Good luck with that!
Fan shroud. Then take the motor mounts and then the trans mount loose.
Then take the dust cover off the tranny and tben remove the starter. Then
you can jack the front of the motor up. Then remove the oil pan.
I haven done a v-8 in the truck. Good luck with that!
#5
Junior Member
Join Date: Dec 2012
Location: Connecticut
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
On the 4.9 the pan can be dropped onto the crossmember to get a few inches clearance. There's enough to fish a new gasket into place under the oil pump but not much more work than that. It worked on my '94 4.9.
#6
Super easy 6 pack and 2 bologna sanwich job in the driveway.