EGR removal
#1
Junior Member
Thread Starter
EGR removal
Hi all,
Developed a code of 332 and was going to remove my EGR valve but can't get the big nut free from the tube. If I can break free the nut on the other end and the 2 holding the EGR valve on, will I be able to lif the whole assembly out without any problems?
Thanks
Developed a code of 332 and was going to remove my EGR valve but can't get the big nut free from the tube. If I can break free the nut on the other end and the 2 holding the EGR valve on, will I be able to lif the whole assembly out without any problems?
Thanks