Water in headlight housing. How to fix?
11-22-2013, 11:51 AM
#1
Senior Member
Thread Starter
Water in headlight housing. How to fix?
WTH the splash guards being trimmed due to lift, what are y'all doin to protect the fog lights from water. I just noticed my driver side has some in the housing.
Any suggestions on cleaning and protecting? TIA
Any suggestions on cleaning and protecting? TIA
11-25-2013, 08:27 AM
#2
Senior Member
Mabuhay!
You'll have to remove the light to do it right. Once it's off fill it about 1/2 with plain ol' blue window washer fluid. Shake that around. Dump it out. Repeat until it looks clean. To speed up the final drying process fill about 1/4 full of isopropyl alcohol. Shake that around. Dump it out. Allow to dry.
Inspect the bulbs O-ring (if it has one) for proper seal and the housing for cracks.
Good luck.
You'll have to remove the light to do it right. Once it's off fill it about 1/2 with plain ol' blue window washer fluid. Shake that around. Dump it out. Repeat until it looks clean. To speed up the final drying process fill about 1/4 full of isopropyl alcohol. Shake that around. Dump it out. Allow to dry.
Inspect the bulbs O-ring (if it has one) for proper seal and the housing for cracks.
Good luck.