Eco_Punisher

Ok installed New LED tail light assembly found here--

http://www.xtralights.com/09-upfordf...blackpair.aspx

also replaced the front head lights (Anzo) but used the stock front turn signal bulb. Everything worked fine until today, I started to get the fast flash..thought I burned out a bulb or something so I jumped out and all lights are working...the thing is it is only fast blinking on the right turn signal the left turn signal flashes correct speed and the 4 ways flash correct speed it is just the right signal that flashes fast...any ideas?

I am in the process of ordering the rest of the lights inside and out led. the fronts turn signals will be switchbacks.

Damn Dirty Ape

iTrader: (1)

You need to add load resistors. Due to the low current draw the truck thinks you have burned out bulbs.

http://www.xtralights.com/loadresist...lb-single.aspx

MileHighFX2

Make sure you get the 6ohm 50watt resistors. Anything lower than that will not work. I have switchbacks for my turn signals and work good.

Eco_Punisher

Curious on why it didn't do it immediately but took 4 days to happen and it only happens to one side...

MileHighFX2

It's weird man when I installed my switchbacks they would only hyper flash when I would hit my brakes??? After a while it went away but it was like that for like a week.

Eco_Punisher

But, thats the thing I dont have switchbacks on yet...Im running the stock bulb up front and LED's tails on the rear that are set up not to hyper flash