TheRetrofitSource Group Buy
#841
Senior Member
Finally finished!!! Wow what a process....I spent wayyyyy more time on these than my Ram ones. I like these better overall due to the Panamera Switchback shroud and the paint job I chose. I think I am going to like the D2S better in my Ram set than the Mini 7.0's that I used this time around. Still a significant improvement over stock. Coming up with a plan on how to wire everything was a living nightmare. But the payout was great! I'll try to remember to get some pics tomorrow during the day. I literally just finished and came inside to get a beer.
Demon eyes are nowhere near as bright as the shrouds but still pretty neat and worth the wiring hassle of doing them independently to a switch inside.
Demon eyes are nowhere near as bright as the shrouds but still pretty neat and worth the wiring hassle of doing them independently to a switch inside.
#842
Junior Member
Tested my components today and everything seemed to be working. There was a humming noise that got quieter after a few seconds. I couldn't tell if it was the harness or the ballast closest to the battery. Either way is that common with this setup? Mini d2s 35w 2014 f150. Also when wiring the high beams the projectors come with a brown and white wires, does the polarity matter?
#843
Senior Member
Tested my components today and everything seemed to be working. There was a humming noise that got quieter after a few seconds. I couldn't tell if it was the harness or the ballast closest to the battery. Either way is that common with this setup? Mini d2s 35w 2014 f150. Also when wiring the high beams the projectors come with a brown and white wires, does the polarity matter?
#844
Well finally got back to working on them. Going for an alignment test this weekend. My driveway has a slight slope to it. Taking it to my gym to do the alignment. Wired up and everything was working properly.
#845
Senior Member
The following users liked this post:
dayday (07-28-2016)