Review: Putco DRL for a 2015 Ford G3 Dayliners
01-27-2016, 11:44 AM
#1
Senior Member
Thread Starter
Review: Putco DRL for a 2015 Ford G3 Dayliners
Installed these around Christmas time, and I have already had one go out. These are the Switchback LEDS.
Link for reference
http://www.putco.com/products.cfm?ac...5-A5FA83FAC910
Worked well up until now, install was a bit of a hassle, as you need to remove the headlight assemblies completely. Kit did come with everything needed to install.
Did not use the clip on wire connectors, soldered all of my connections in hopes to eliminate any problems down the road.
Anyway I am working with the vendor I bought them through to get a replacement.
If these go out again I will remove them all together.
Link for reference
http://www.putco.com/products.cfm?ac...5-A5FA83FAC910
Worked well up until now, install was a bit of a hassle, as you need to remove the headlight assemblies completely. Kit did come with everything needed to install.
Did not use the clip on wire connectors, soldered all of my connections in hopes to eliminate any problems down the road.
Anyway I am working with the vendor I bought them through to get a replacement.
If these go out again I will remove them all together.
02-03-2016, 01:55 PM
#3
Installed these around Christmas time, and I have already had one go out. These are the Switchback LEDS.
Link for reference
http://www.putco.com/products.cfm?ac...5-A5FA83FAC910
Worked well up until now, install was a bit of a hassle, as you need to remove the headlight assemblies completely. Kit did come with everything needed to install.
Did not use the clip on wire connectors, soldered all of my connections in hopes to eliminate any problems down the road.
Anyway I am working with the vendor I bought them through to get a replacement.
If these go out again I will remove them all together.
Link for reference
http://www.putco.com/products.cfm?ac...5-A5FA83FAC910
Worked well up until now, install was a bit of a hassle, as you need to remove the headlight assemblies completely. Kit did come with everything needed to install.
Did not use the clip on wire connectors, soldered all of my connections in hopes to eliminate any problems down the road.
Anyway I am working with the vendor I bought them through to get a replacement.
If these go out again I will remove them all together.
02-03-2016, 02:06 PM
#4
Senior Member
Thread Starter
The following users liked this post:
sticker500 (02-03-2016)
02-03-2016, 06:08 PM
#5
I called them today and the person I talked to had such a disconnect with their product. She said they take pictures in in darker conditions so they demonstrate how bright they are. Wow she really said that.
They are too expensive for a stick on solution if they can't be seen in full sun.
They are too expensive for a stick on solution if they can't be seen in full sun.
