Cmorales30

I'm looking to start a new project, and my project is to do the raptor style grille lights. i've looked around.. has anyone used this brand or similar?

[http://www.ebay.com/itm/3x-JDM-LED-Amber-Grille-Lighting-Lamp-for-Ford-F150-F250-F350-F450-SVT-Raptor/221793143810?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D32222%26meid%3D1afcd83a0e664fbdb2ef18a946857f9a%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D131458332781&rt=nc[/URL]

Fatfenders

Those should work fine. I picked up a sheet of flexible black plastic at Menards. I scored a strip with a utility knife and snapped the plastic off, then cut it to length. It was then mounted to the upper grill studs. All wiring was run in 1/4" split loom tubing, down toward the curbside hood hinge and connected to the parking light wire at the right front headlight. I can do some pictures if you'd like of the installed lights. I put four LEDs in so it wasn't exactly like the Raptor.

tx_fx2

Saw these last night.

http://www.f150leds.com/f150-led-raptor-grill-light-kit