Not another retrofit thread
#12
Senior Member
Thread Starter
Working on some retro fog lights. Still have not sealed these up yet. Deciding whether or not to paint the chrome ring on the projector. Any thoughts?
#14
Senior Member
Thread Starter
Yep same process only 100x easier!
The following users liked this post:
Nevint (01-25-2014)
#15
Senior Member
Thread Starter
#16
Senior Member
Thread Starter
Started the aiming process and trimming the fog light bracket.
Sealing these up tonight. Need to find a way to mount the vertical aiming screw as this was trimmed off to mount the projector.
Sealing these up tonight. Need to find a way to mount the vertical aiming screw as this was trimmed off to mount the projector.
#17
Senior Member
Thread Starter
Figured I'd update this a bit..
This is what I ended up coming up with for the vertical adjustment.
Did some trimming on the back of the fog light bracket.
6000K Fog lights. Will probably be switching to 4300K or 5000K to match my 6000K headlights better. The fog lights appear blue-er in the smaller housings.
This is what I ended up coming up with for the vertical adjustment.
Did some trimming on the back of the fog light bracket.
6000K Fog lights. Will probably be switching to 4300K or 5000K to match my 6000K headlights better. The fog lights appear blue-er in the smaller housings.