natemmr

I Just bought aftermarket projector Housings for my 2010 F150. They are set up with 2 H1 bulbs instead of the h13 hi/lo. I want to put a 6000k hid low beam in then a Hi powered reg bulb for the hi beam. I want the Low beams to stay on and just add the hi beam for extra light when i turn them on instead of the truck actually switching over to the other bulb. I could use any advice some one could give me. I know they make kits for the GM trucks to do this but they run individual bulbs from the factory.

mdsweeney4243

You would have hard wire the hi into the lo beam factory wiring, but having both on would be excessive unless I'm misunderstanding what you're trying to do

natemmr

well i don't want them both on with the low beams but i do only with the high beams. Instead of the bulbs switching( on the stock bulbs it is a dual fillamint and they switch back and forth for the Hi/Lo beam) I am looking to keep the low beam what it is and when i turn on the hi beam just turn that bulb on instead of switching.