My Retrofit Project 2013 F150
#1
My Retrofit Project 2013 F150
Ok guys I plan to start a major retrofit project with ZERO experience on the subject so I hope to let others learn from my mistakes with this thread. I have as of 5 minutes ago ordered the following...
-2013 F150 HID Black Housings
-MOTOCONTROL BIXENON: H13/9008 RELAY
-Bi-xenon: Hella EvoX-R Projectors
-D2S: Osram Xenarc 66240 CBI Bulbs
-D2S: Morimoto 3Five DSP Ballast
-2 x 6" White and 2 x 3" Amber LED Strips (to go inside housing horizontal above and below F150 logo)
-LED Amber Angel Eyes 100mm
Currently I have the stock STX halogens on her with one just having been busted up in a accident 2 days ago excellerating this project of mine. I have also ordered a new front and rear bumper and new Engo 4" LED floodlights to go in both the front and rear bumpers.
No winch yet this will be a complete lighting (with new bumpers) retrofit of my truck. I am very open to anyone giving me tips or suggestions on parts or materials I will need as well.
Hope that people can follow this thread and learn/help as needed!
-James
-2013 F150 HID Black Housings
-MOTOCONTROL BIXENON: H13/9008 RELAY
-Bi-xenon: Hella EvoX-R Projectors
-D2S: Osram Xenarc 66240 CBI Bulbs
-D2S: Morimoto 3Five DSP Ballast
-2 x 6" White and 2 x 3" Amber LED Strips (to go inside housing horizontal above and below F150 logo)
-LED Amber Angel Eyes 100mm
Currently I have the stock STX halogens on her with one just having been busted up in a accident 2 days ago excellerating this project of mine. I have also ordered a new front and rear bumper and new Engo 4" LED floodlights to go in both the front and rear bumpers.
No winch yet this will be a complete lighting (with new bumpers) retrofit of my truck. I am very open to anyone giving me tips or suggestions on parts or materials I will need as well.
Hope that people can follow this thread and learn/help as needed!
-James
#6
Senior Member
I just did the same thing.
Started with lights from TRS
I baked them in the oven and separated the lens from the housing. Plan was to remove the projector and swap it with a tuned EVOX-R D2S running a 50w Phillips CBI bulb set.
Also planned to add a set of xBLed 100mm halos and 75mm strips.
Here's the new projector ready to go in, not much to look at but this ****er is bright.
Mounted
Resealed and ready to install
They're kinda cool looking
Installed
Started with lights from TRS
I baked them in the oven and separated the lens from the housing. Plan was to remove the projector and swap it with a tuned EVOX-R D2S running a 50w Phillips CBI bulb set.
Also planned to add a set of xBLed 100mm halos and 75mm strips.
Here's the new projector ready to go in, not much to look at but this ****er is bright.
Mounted
Resealed and ready to install
They're kinda cool looking
Installed
The following users liked this post:
yanki01 (10-18-2014)
Trending Topics
#8
I just did the same thing.
Started with lights from TRS
I baked them in the oven and separated the lens from the housing. Plan was to remove the projector and swap it with a tuned EVOX-R D2S running a 50w Phillips CBI bulb set.
Also planned to add a set of xBLed 100mm halos and 75mm strips.
Here's the new projector ready to go in, not much to look at but this ****er is bright.
Mounted
Resealed and ready to install
They're kinda cool looking
Installed
Started with lights from TRS
I baked them in the oven and separated the lens from the housing. Plan was to remove the projector and swap it with a tuned EVOX-R D2S running a 50w Phillips CBI bulb set.
Also planned to add a set of xBLed 100mm halos and 75mm strips.
Here's the new projector ready to go in, not much to look at but this ****er is bright.
Mounted
Resealed and ready to install
They're kinda cool looking
Installed