230748

17" LED bars... avoid them IF You find one... it's an odd size. Any of those ODD sizes are ODD for a reason... you may need to just install a 12" in the space

zat

I have a 20" on mine. No trimming needed.

Pienstar

That's exactly the look I'm going for! However, I have a 2015 and I'm guessing the opening is slightly smaller on mine. I measured it at 18.75 wide. I want something that fills most of the space, and I think 17 or 18 inch would fit the bill. 4x4TruckLEDS says to avoid the 17" models, but that might be my only option without any trimming or cutting....

230748

I only say that because it's a weird size and that tells me it's not a quality product (the quality manufactures stick with the normal sizes).

20" wide but that might be with the brackets. I have a 20" at home, when I get home later (if it's not raining) I'll see how it fits in that spot for you.

Pienstar

I understand completely, and that makes sense. I appreciate the help!

zat

I believe it will fit. I also had a measurement around that 18.75. Perhaps you could install from the back but may need to create/modify a bracket system. I bolted mine on above the light.
Good Luck !

Pepito113

I want to do something like this. But it blocks some air flow into the intercolor you see in the back round. I have the EB. For 5.0 u should be ok.

2016f150fx4

37 inch curved led bar

230748

We have available single row LED bars as well... need to add them to the site still

Tteel

https://www.f150forum.com/f118/adding-light-bar-294619/

Check out post number 10. That's a 20" rigid. I'll be doing that once I get the dual d brackets as well. Just a bit of trimming needed but should be bad.