Contura V Switch Help
#1
Senior Member
Thread Starter
Contura V Switch Help
I'm going use one of OTRATTW's Contura V switches for a light bar on my 2010. I would like to use a feed from the dash lights for the switch illumination and would like it to dim with the dash. Should I just tap into the harness after the dimmer? Is there a better feed to pull from?
I also would like to have the switch power on and off with the auto headlights. Should I tap into the parking light feed from the passenger junction box?
I also would like to have the switch power on and off with the auto headlights. Should I tap into the parking light feed from the passenger junction box?
#2
Senior Member
Thread Starter
Got my switch mounted. I used an add-a-fuse in the passenger kick box on fuse 41 for the relay power. fuse 41 is a delayed switched on/off when a door is opened. As for the light on the switch, I tapped the purple/grey wire on the pedal adjust switch. the purple/grey wire throughout the dash controls the brightness. I had tried tapping it under the steering column but the voltage was not constant.
Hope this helps someone in the future!
Hope this helps someone in the future!
The following users liked this post:
BluePhoenix (04-23-2015)