LED bed lighting install w/ ARE Z Series cap/topper (PICS)
08-19-2012, 01:04 AM
#31
F150 Forum
Originally Posted by BucketMan
These are the light fixtures:
http://www.superbrightleds.com/cgi-b...SMD.htm#photos
12" cool white: WLF-CW30SMD
24" cool white: WLF-CW60SMD
Mounting clips, I used 2 per light: WLF-MC
Weatherproof rocker switch: WRRS-SP
Everything else I had at home or was already installed: wiring.
Let me know if you need anything else.
used numerous times out in the pitch black, now all I need is a roll-x cover!
08-19-2012, 03:22 PM
#32
Senior Member
Thread Starter
Sweet! Great job. I've had 3 A.R.E. caps all with carpet lining. I agree, their dinky light stinks. I had Yakima rails installed to recieve the Q Posts.... I just never got around to changing the light now with the new ones.
Now that I see your 'commercial quality' photo of your finished work at night, I'm going to do this too... when I get a cap.
In the original post, you mention your dad always had LEER.
Do you see any difference in quality, is LEER worth it?
Now that I see your 'commercial quality' photo of your finished work at night, I'm going to do this too... when I get a cap.
In the original post, you mention your dad always had LEER.
Do you see any difference in quality, is LEER worth it?
08-19-2012, 09:52 PM
#33
Junior Member
Thanks. You sort of confirm what I've been observing.
tuxedo black, can you use a tonno with a cap??
Great idea though.
I take a long window shade and strip the hardware off, make it longer and put black cotton fabric on it... puuuuffff.... a security screen.
tuxedo black, can you use a tonno with a cap??
Great idea though.
I take a long window shade and strip the hardware off, make it longer and put black cotton fabric on it... puuuuffff.... a security screen.
08-25-2012, 08:18 AM
#37
Junior Member
08-26-2012, 02:55 PM
#38
F150 Forum
Originally Posted by Fire Mist
You mentioned using a roll-x cover with a cap. I didn't know it was possible
The following users liked this post:
BucketMan (02-18-2014)
05-25-2015, 04:17 PM
#40
Junior Member
How did you attach the metal clips to the cap?
I see you have yours carpeted, did you glue them?
I do not have carpet and was going to use epoxy...
Any ideas?
I see you have yours carpeted, did you glue them?
I do not have carpet and was going to use epoxy...
Any ideas?