FallGuy0217

Hey guys. I installed some new lights and thought I would share a little. I heard good things about e-yourlife LEDs so I thought I would give them a try since they are quite affordable. I installed a 42" bar behind the main grill and two cubes in the bumper grill area. I wanted to make it look as clean as possible so I routed the wiring harness through the same path as the windshield wiper fluid hose. I put the wiring through the firewall by cutting a hole in the huge rubber grommet that the other electrical wiring harness goes through. I was a bit nervous about cutting a hole in my dash, but I think I did a pretty good job. The switch panel looks almost stock. Since I did this during the daylight, I haven't had a chance to test them out at night, but right now everything is working as expected. For about $250, I couldn't be happier.

Glech

Looks nice! Those cubes are cool.

tx_fx2

How did you mount the cubes and where did you get the switches/panel? Thanks.

FallGuy0217

There is a small brace that runs across the bottom of the grille. I drilled a couple of holes in it and mounted the cubes to the bottom of that brace. The switches and panel came from amazon. Just do a search for it and lots of switches and panels will come up.