HID Headlight and HID Fog light problem
08-04-2013, 06:39 PM
#21
Ballast plugged into harness, harness blue/white wires connected to Red n black wires running to factory fog connector.
HIDs in the headlights work fine but every dang time.I pull the switch to turn on fogs, the fuse blows.....this is killing my brain ease help
HIDs in the headlights work fine but every dang time.I pull the switch to turn on fogs, the fuse blows.....this is killing my brain ease help
08-04-2013, 07:02 PM
#22
I've heard on other forums and I think on here as well, perhaps upgrading to a 30amp fuse? I tried a 20amp & it blew as well. Seems logical since neither of the two fuses in the harness blew
08-04-2013, 09:09 PM
#23
Well that didn't work either! Tried a 30amp and it worked for a split second then blew. Harness fuses still fine.
Only thing I can think of is...... I have the power for the fogs harness directly off the battery. I'll try hiking it to the parking light power tomorrow and see if that helps.
Only thing I can think of is...... I have the power for the fogs harness directly off the battery. I'll try hiking it to the parking light power tomorrow and see if that helps.
Last edited by Redbusa06; 08-05-2013 at 03:25 AM.
08-05-2013, 02:05 PM
#24
Narrowed it down to a bad bulb. Tried it without the harness and the driver side works fine. Passenger side wouldn't fire. Switched ballasts and passenger didn't work, switched bulbs and still didn't work so it's the bulb.
08-06-2013, 06:33 PM
#25
Junior Member
Join Date: Jul 2013
Location: Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
hey, I bought a halegon to hid conversation kit for the headlights for my 2013 with daytime running lights. the kit is a 35w 6000k hi/low and I was wondering if its safe to just plug in and go or do I get the relay harness?
