HID & DRL Daytime running lights
10-06-2010, 06:34 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: saskatchewan, Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
HID & DRL Daytime running lights
anyone have any experience with installing HID kit and having their daytime running lights keep working.
i was told several sources that you need an HID resistor on both the high and low beams and that this is required for both lights.
i am looking at getting the product from DDM tuning but the tech support did not know for sure if the error reading code woudl correct this issue.
any info appreciated.
i was told several sources that you need an HID resistor on both the high and low beams and that this is required for both lights.
i am looking at getting the product from DDM tuning but the tech support did not know for sure if the error reading code woudl correct this issue.
any info appreciated.
10-06-2010, 06:40 PM
#2
Senior Member
Are you looking for a less intense HID for your DRLs, or just want to use the low beam HIDs for your DRLs?
I would think you could just bypass the stock DRL resistor up by the front bumper which would give you low beam DRLs.
I would think you could just bypass the stock DRL resistor up by the front bumper which would give you low beam DRLs.