help with install of xentec hid headlights
#1
Junior Member
Thread Starter
Join Date: Jun 2012
Location: South Louisiana
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
help with install of xentec hid headlights
how do i connect the red and black wires to the factory plug in? there's two wires but three holes in the factory plug. the kit came with some kind of coupler but it still has three holes
#2
Member
iTrader: (2)
Take that black piece and set it to the side, the middle is the ground so stick the black wire into that slot in the middle. Now the positive is either one on the side. So stick it in one and turn on your headlights. You only have single beam light bulbs so only the low beams will work. Once you figure out what wires go where. Push them into the back of the black piece untill they click and your good to go