Harness from H13 to HID OEM headlamps
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Santa Fe, NM
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Harness from H13 to HID OEM headlamps
So I recently purchased a set of the OEM HID headlamps (lamps most commonly found in raptors) and was looking for a harness for my 2013 XLT. Only thing is within all the harnesses I have found, none of them include the two plugs found inside the headlamp
https://www.f150forum.com/attachment...1&d=1389854018
each harness has only had the one connection that goes to the ground, battery, and main port
https://www.f150forum.com/attachment...1&d=1389854116
Do I need to pay any attention to the ports inside? at least cover them? Please help!
https://www.f150forum.com/attachment...1&d=1389854018
each harness has only had the one connection that goes to the ground, battery, and main port
https://www.f150forum.com/attachment...1&d=1389854116
Do I need to pay any attention to the ports inside? at least cover them? Please help!
#2
F150 Forum
Your not going to light much up without the OEM ballasts. These connections that are inside the headlights plug into the ballasts which mount over that big square hole. The H13 conversion harness plugs into the single 4 pin connector on the back of each headlight.
If you need OEM ballasts, I have 'em. All brand new.
If you need OEM ballasts, I have 'em. All brand new.
The following users liked this post:
mjrgfps (07-24-2018)