Fusion Fog Light Retro
#1
Fusion Fog Light Retro
Well my plans on building a set of fogs for my truck were put on hold waiting on TRS to bring their matchbox projectors back. I've been doing a ton of research looking for another projector to use, but not much luck. I've been hearing really great things about the Ford Fusion fog lights, so I bought a set and i'm going to try to "retrofit" them into my stock fog light housings. The good thing about the fusion fogs are; they are built so that they can be used as is. Meaning I wont have to hack away and mount them in my current fog lights, just the brackets. I'll probably put a piece of Lamin-x on the lenses just for good measure though.
Hopefully they should arrive mid week, I'll update with pics throughout the process to help anyone else in the future. As of right now there is very little info on this so hopefully it wont be too hard.
Hopefully they should arrive mid week, I'll update with pics throughout the process to help anyone else in the future. As of right now there is very little info on this so hopefully it wont be too hard.
The following users liked this post:
aregis30 (04-26-2014)
#2
F150 Forum
Sub'd.
#6
Where did you buy them from? . Also thought about these
http://www.ebay.com/itm/UNIVERSAL-P1...60557687292%26
Taking that bracket off and fitting in to current fog housing. Or making a new bracket.
Good luck waiting to see how this works out for you!
http://www.ebay.com/itm/UNIVERSAL-P1...60557687292%26
Taking that bracket off and fitting in to current fog housing. Or making a new bracket.
Good luck waiting to see how this works out for you!
Last edited by TeamZambo; 01-14-2013 at 11:42 PM.
#7
Where did you buy them from? . Also thought about these
http://www.ebay.com/itm/UNIVERSAL-P1...60557687292%26
Taking that bracket off and fitting in to current fog housing. Or making a new bracket.
Good luck waiting to see how this works out for you!
http://www.ebay.com/itm/UNIVERSAL-P1...60557687292%26
Taking that bracket off and fitting in to current fog housing. Or making a new bracket.
Good luck waiting to see how this works out for you!
Hopefully I'll be able to fit the fusions into the current fog bracket, but if needed I'll fabricate a new one. I really think I can make it fit well into the stock bracket though.
Trending Topics
#9
Ok so I got my projectors in today and these things are the perfect size. I took the old fogs out of the housing for a lil size comparison.
Here is the stock fogs in the stock housing.
This is the back of the housing with the original fog removed.
Comparing the old fog to the new projector
The stock housing needs to have the back of it modified for the projectors to clear
Here is the stock fogs in the stock housing.
This is the back of the housing with the original fog removed.
Comparing the old fog to the new projector
The stock housing needs to have the back of it modified for the projectors to clear
#10
F150 Forum
What's the lens diameter of the fog projector?