fog light with high beams
#1
Member
Thread Starter
fog light with high beams
I bought the correctional spliters from TRS to make my fogs stay on with high beams. Just wondering if anyone has installed these before? Can someone help me with a how to guide? I have projector retro fits installed already aswell.
#2
F150 Forum
#3
Member
Thread Starter
thanks bil, I did see that. But for some reason I am having a "blonde" moment. its not making sense to me....
#4
Can you be more specific? That is purty well-written, so if you can point to what exactly is still not clear, perhaps we can help simplify. No guarantees though
MGD
#5
Member
Thread Starter
i normally have no issues with this stuff, but just not clicking. maybe once i actually have a look at the truck itself it will all come together.
#6
F150 Forum
The blue/black Y splitter isn't used. Starting from the orange/black Y splitter, the one with the mesh that covers the one-way diode, the 9006 male connector (the one with the pins) will plug into the harness plug that would normally go to the the high beam solenoid at the back of the headlight. The plain orange/black wires go to the high beam connector on the back of the headlights and the other will be used for the fog lights (the side with the diode). The orange/black splitter is connected to this. The male 9006 connector will plug into the OEM fog light connector and the other to the fogs.
This way, when in normal fog light mode, the fog is energized using the OEM power, and when in high beam mode, the fogs are energized by the high beam solenoid power, going thru the one-way diode.
I hope this makes sense.
This way, when in normal fog light mode, the fog is energized using the OEM power, and when in high beam mode, the fogs are energized by the high beam solenoid power, going thru the one-way diode.
I hope this makes sense.
#7
If you got the foglite splitter version, this pic from the product page should help:
http://www.theretrofitsource.com/med...r-1112_3_1.jpg
Odd that they say it's not available though: http://www.theretrofitsource.com/acc...l#.UxVQnz9dVog
MGD
http://www.theretrofitsource.com/med...r-1112_3_1.jpg
Odd that they say it's not available though: http://www.theretrofitsource.com/acc...l#.UxVQnz9dVog
MGD
Trending Topics
#10
F150 Forum
I was thinking of making my company logo "Flash me your high beams".