You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just missed the 1000th post here, but for 1001 I have a few crappy cell phone pics of my lights from Bil which came Thurs night.
Anyway, truck is kind of dirty but the lights look amazing...these pics do no justice whatsoever, but I don't have a real camera so you'll have to take my word for it and I'll get some better pics when I can.
As for the install, once I got everything laid out it was a breeze...when I fired up the lights, I put the key in accessory mode and they worked great. Then when I turned over the ignition, I lost both projectors. Sure enough, I blew a fuse in the wiring harness (25a for those wondering). I replaced it and they fired up fine.
I also added LED switchbacks for the turn signals (with resistors). The driver's side turn signal works halfway right now - it flashes amber with no hyper flash, but it doesn't turn white at all. The passenger's side doesn't work at all...and interestingly enough neither does the side marker light. Interesting because I tapped into there for the LED halos, and they work fine. I'll have to do some investigating tomorrow.
ugh...so I missed on 2 counts; not 1001 and the pics didn't upload. I just signed up for Flickr to share my iPhone pics (via iPhoto)...not sure why it doesn't work, but I'll figure it out and get the pics up.
2011 F150 XLT 4x4 CC SB, 6 inch procomp coilover suspension lift, 20 inch moto metal rims, 35x12.50 toyo mt's, afe stage 2 cold air intake, flowmaster 44 super series with 4 inch black powder coated tips, 2 8 inch polk audio mo mo's with custom ported box with a sound stream amp, SCT X3 programmer, 4 train horns with a 1.5 gallon tank that put out a whole lot of noise!
Has anyone else had trouble wiring in the LED's? the keep blowing the 20 amp fuse of the park light as soon as i connect both. they are connected to the side marker lights. would i have more luck connecting them to the turn signal wires?
2011 F150 FX4 Screw 3.5L EcoBoost 4X4 3.73 rear end 5.5' bed, FX Luxury Package, Sony sound, loaded. Mods/Addons: T-Rex lower grille, StainlessWorks 3.5" catback, Volant CAI, Access Lightrider tonneau cover, Recon LED smoked taillights, Recon LED smoked 3rd brake light, V&G Spray-in bedliner, USB 2, Billinvic retrofit headlights, kpope led puddle lights.