Help with Rigid Dually D2's.
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Location: bonifay florida
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Help with Rigid Dually D2's.
Got my d2 driving lights hooked up. They are the kind that is supposed to be dimable but the 3 way rocker switch only turns them on one setting. Not sure if its bright or dim. Does anyone else have experience with these? Im wondering if the switch is defective. I've triple checked the connections and they are hooked up correctly to my knowledge. Any help is appreciated.
#3
Junior Member
Thread Starter
Join Date: Aug 2012
Location: bonifay florida
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i read that on the rigid web site, but i didn't understand the "auto" in reverse function. Could you explain more? Are you saying they are not dimmable? I'm not using them as backup lights.
#4
Senior Member
iTrader: (3)
So the switch in the top position is constant on that is basically coming right from your battery the middle position is the off position always off
The lower position should be the on when in reverse you actually tap into a reverse light and that will trigger the lights to come on when the truck is in reverse only once it's out of reverse the lights go off
The lower position should be the on when in reverse you actually tap into a reverse light and that will trigger the lights to come on when the truck is in reverse only once it's out of reverse the lights go off
#6
Senior Member
you are correct there are D2's that have 2 power light low output and high is full output. They are new