tuxedoblack11

Next set I'll encapsulate them with that special clear coat resin and that should be the end of the Issue I would hope.

Toddman38

iTrader: (5)

Is it Flexible??? If not, may have issues Installing them... As a little flex is required!

tuxedoblack11

I think it is I'll check the specs on it before I do it tho

GetScrewed

I siliconed my clear lenses to the black pieces first, let cure then slathered the board and let that cure before installing mine. They've been on for a few days and have already made it through a nasty downpour on the expressway, a pressure/touch-free car wash and a good ole hand wash by yours truly. I think I went over board w the silicone but hopefully that works in the long haul.

Love the way these things look and was really happy to get those corny orange reflectors off them mirrors.

Toddman38

iTrader: (5)

Good luck.... I did the same on my last two pairs...

yanki01

mine has held up with the past few high pressure washes, a few hand washes and rain showers. no issues here.

Toddman38

iTrader: (5)

This is your 2nd pair, correct?

tuxedoblack11

Second pair still going strong!

2011SuperCrew

iTrader: (2)

Mine as well so far!

Haloman

Anyone have a write up or video on getting the puddle lamps out? Would like to see about going thourgh there before trying the mirror.