ak_cowboy

Touche lol

MomoMeloco

Well I finally received my hid kit from DDM tuning, after over 3 weeks of waiting.

My fog lights look good but the driver side doesn't always fire up when turned on.

I also got the headlights with hi/lo but I can't get them to turn on. If I bypass the "control module" with a relay harness run direct to the ballast. I don't know what hell is problem.

I am never getting anything from DDM again I learned my lesson.

Now I will have to wait a month to get anything done for warranty.

Wrighty97

I've got a 97 f150.. what kit from DDM should I be looking at for a headlight kit? I'm not to intelligent on lighting.. thanks!

ak_cowboy

Read from page 1... and don't buy from DDM.

Olansky

I can't remember what I have to turn off so when I unlock and lock the truck my lights don't blink and wear out the ballasts?

ak_cowboy

Your perimeter lighting. The instructions to turn it off are in your owners manual

Reatki

I wouldn't worry about it to much, fella.

I put my first HID kit in my first truck - 4 years ago. I have since transferred it to and from 3 vehicles since, and it now has a home in my dads car. Still going strong on all fronts, and no issues.

In fact, I even had the hedalight on one vehicle smashed while the HIDs were running, causing the plastic wall to contact and melt onto the bulb. I scraped it off with an Exacto till she was clean as new, and she still burns strong.

And parts are so cheap, you can replace a ballast or bulb for $10 should something go.

Reatki

As far as kit quality goes - they're all pretty similar. I buy a brand called 'Silver Eagle' and it has lasted me years.

You want a 9007 HID HI/LOW kit. Ensure it has the motorized bulbs for the full conversion.

manual3

We am have a problem with on my hids on my truck and after check everything it was the Wiring Harness on that side that didnt work and then I noticed there's a fuse looking thing but am not sure if it is a fuse so am wondering if it is?? Here's a picture

manual3

And the problem is when I switch 2 high beams the hid does not work on that side