Satish

Installing Led light bar to my F150 2016 XLT deactivated my Rear park aid. How do get it activated

maco

Not real sure what you are asking here?? Why would you deactivate the rear park aid ?? Those wires may be too small for your device as well ?? I would run a fused dedicated power supply into the cab to a on/off switch in the cab ...then run a wire from the switch to your light !! You can also Run a switch / trigger wire from cab to @ a fused relay @ the battery that would activate the relay to turn on a dedicated power supply to your device....

Satish

Sorry, if I had not explained it clearly. I recently installed a plug and play led light bar from Alpena to my truck and used the trailer harness to connect the led bar. The led bar light is working fine however it deactivated my rear park aid. Looks like the truck is assuming that there is a trailer attached and ma

Display
y be deactivated my rear park aid. I am trying to get it activated as it helps me a lot when I backup.

maco

I would return everything back to normal & see if your park aid returns !! If it dose no harm done....Concentrate first & only restoring your park aid system !! Then rewire power to the not so plug & play lite bar... Now I would rewire a new power wire to your lite bar as I expllained in previous post... You might have to check for a blown fuse...It sounds like you tapped into the park aid system.......... repair that first !! Good Luck !!

Fly F150 4x4 XLT

This is what i got for my 2020 f-150 XLT 4X4 Supercrew. This what i use to install my Putco Tailgate light bar and when i connected this connector it worked just fine It works like it did before the tailgate light bar was installed 👌🏾👌🏾👌🏾😁