2015 LED questions
#1
Member
Thread Starter
2015 LED questions
Just brought home a '15 and want to upgrade my exterior lighting to LED. Went to NAPA's website to look up bulb numbers and here's what I found:
Lo Beam: H11
Hi Beam: 9005
Fog Lights: 9140
Front Turn Sig: 7444NA
Rear Run, Brake & Turn: 3157
Reverse: 3156
License Plate: 194
Center Brake: 912
Two questions: 1) anybody with a 2015 see any wrong part numbers here? and 2) If I go LED for the front and rear turn signals, will I need a load stabilizer?
Thanks is advance for the help.
Lo Beam: H11
Hi Beam: 9005
Fog Lights: 9140
Front Turn Sig: 7444NA
Rear Run, Brake & Turn: 3157
Reverse: 3156
License Plate: 194
Center Brake: 912
Two questions: 1) anybody with a 2015 see any wrong part numbers here? and 2) If I go LED for the front and rear turn signals, will I need a load stabilizer?
Thanks is advance for the help.
Last edited by Slider57; 11-26-2015 at 12:53 PM. Reason: ..
#2
Senior Member
The numbers look good to me. You will need load resistors for the front turn / stop, turn locations. No warning messages I saw but did hyperflash until I added the resistors
other than that your good.
other than that your good.