gwainrig

Replaced my stock headlights on my 2012 F150 with OEM HID's in Dec 2013. Everything worked good until a few weeks ago. now when I try to put the brights on, the headlights go completely out. Pull the level and the dims come back on. Any thoughts on the issue??

mwcjr159

Had the same problem. Check the high beam fuse in the passenger floor fuse panel. That was my issue.

MCDavis

iTrader: (1)

Could also be a bad relay in the H13 wiring harness.

gwainrig

Thanks,
I will take a look at both and see if they fix the issues...

hoopty

I'm going through the same thing on my 2013, I just installed mine, they have never worked. Replaced the relay on the harness, still doesn't work. I pulled the hb fuse and put it back in and the hb started working. Got in it tonight and no highs again. Everything else works fine. I'm going back to stock tomorrow to make sure they are working.

The HB fuse is in the panel in the passenger floor board on my 2013.

Toddman38

iTrader: (5)

Hmm... Ive had the oem hids installed in my 12' since nov of 13 with the morimoto wiring harness... No issues to date, knock on wood!

MCDavis

iTrader: (1)

I'm keep a spare harness in the toolbox knowing that they are often the weakest link.

Toddman38

iTrader: (5)

But didnt your 13 Platinum come from the factory with hids?

MCDavis

iTrader: (1)

Sure did, and they're in the garage in a box
I'm running a full retrofit

Toddman38

iTrader: (5)

Yes Im aware, I guess the retro required the harness as the stofk hids didnt? Is what I was asking....