2012 F150 Flashing Brake Light Mod
01-21-2013, 07:26 PM
#1
Senior Member
Thread Starter
Quick and easy mod to create a flashing third brake light (cab light). This is my 2012 Ford F-150 SuperCrew.
I didn't want them to flash and then go solid, like OEM on other vehicles. For that, you'd have to install an after-market brake light flasher. Mine, however, will flash continuously until the brake is released. All I did was purchase a basic flasher at AutoZone ($5) and tap it into the power wire of the 3rd brake light. The flasher had plenty of room to tuck in nicely, and it took 10minutes to install.
Youtube videos are below....
VIDEO 1- http://youtu.be/6PDAG1KHmAY
VIDEO 2- http://youtu.be/j_WUSOAAWbk
I didn't want them to flash and then go solid, like OEM on other vehicles. For that, you'd have to install an after-market brake light flasher. Mine, however, will flash continuously until the brake is released. All I did was purchase a basic flasher at AutoZone ($5) and tap it into the power wire of the 3rd brake light. The flasher had plenty of room to tuck in nicely, and it took 10minutes to install.
Youtube videos are below....
VIDEO 1- http://youtu.be/6PDAG1KHmAY
VIDEO 2- http://youtu.be/j_WUSOAAWbk
Last edited by BradWhiteis; 01-21-2013 at 07:31 PM.
