MaxedReflex

i purchased 35w 6000k Slim Ballast head lights for my 2004 xlt super cab F-150, the problem is that i do not know how to set them up, i got everything except a wiring harness, and i do not know where to connect the power to.

If anyone can help me with some suggestions or answers for what i should do that would be great .

And what spots are best to put the ballast

Surkanos

I just zip tied my ballasts behind the headlights away from direct water. As for your wiring issue check "general discussion" and search for a HID forum post. It will answer all ur questions. Or try google or YouTube

05f1504x45.4

You need the relay harness, resistors and a canceller, if your having my luck there going to flicker and will drive you nuts.

06F1504x4

Sounds like you should've bought a kit with a wiring harness. I have 8000k slim bi-xenons on my truck. Came with the relay harness and everything needed. Mine never flicker and I've had no problems. Mounted my ballasts on the inner fender. Takes 30 minutes or less to install. On mine power goes straight to the positive battery terminal.