101 ways to mount your Rigids! - Presented by TAP Auto and goneFXcrazy
06-07-2014, 01:26 AM
#31
Member
Thread Starter
Good stuff guys! New and interesting setups. Remember this thread is to collect as many different ways of doing it. For the sake of avoiding redundancy, unless your setup hasn't been featured yet, don't post it!
Last 2 guys, I like your trucks!
Last 2 guys, I like your trucks!
06-07-2014, 06:08 PM
#33
Member
Thread Starter
A few options, you could put a Dually/D2 in each hole, maybe you can fit some 4" E series in there, again one in each hole.
On the other hand you could just remove it entirely... That would open up your options greatly.
If yours is an EcoBoost and you're worried about blocking airflow, you do what I did. An SR20 in that opening leaves PLENTY of space for airflow.
On the other hand you could just remove it entirely... That would open up your options greatly.
If yours is an EcoBoost and you're worried about blocking airflow, you do what I did. An SR20 in that opening leaves PLENTY of space for airflow.
The following users liked this post:
Total Automotive Performance (09-25-2014)
06-07-2014, 09:45 PM
#34
Member
Thread Starter
Updated again. I will continue to update the list, but updates don't bring it up in your subscriptions so check back every now and then to see if there were changes or additions.
06-10-2014, 10:17 PM
#35
06-11-2014, 09:16 AM
#36
Senior Member
here are how i have them mounted, the four spot lights are now on my headache rack
IMG_0319 by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
IMG_9887 by kevinstuparyk, on Flickr
IMG_0247 by kevinstuparyk, on Flickr
IMG_0254 by kevinstuparyk, on Flickr
IMG_0255 by kevinstuparyk, on Flickr
IMG_0319 by kevinstuparyk, on FlickrUntitled by kevinstuparyk, on FlickrUntitled by kevinstuparyk, on FlickrUntitled by kevinstuparyk, on FlickrIMG_9887 by kevinstuparyk, on FlickrIMG_0247 by kevinstuparyk, on FlickrIMG_0254 by kevinstuparyk, on FlickrIMG_0255 by kevinstuparyk, on Flickr
Last edited by kevin7898; 06-11-2014 at 09:22 AM.
06-25-2014, 12:43 AM
#39
Senior Member
06-25-2014, 09:35 AM
#40
Senior Member
Thought I would add what I did for my reverse lights.
I did have Duallys mounted to rear shackles in flood version. Plenty bright but not much spread of light and I didn't like them hanging from the bottom.
I have since cut into my bumper and flush mounted diffused SRQ2 lights.
Yes, I'm the same idiot who cut my 2013 FX4 grill to add the SR 30" bar on the top of the grill posted earlier in this post.
I also took the Duallys I previously had for reverse lights and mounted in my factory fog lights. (don't have a pic of this but everyone has seen these mounted like this)
I did have Duallys mounted to rear shackles in flood version. Plenty bright but not much spread of light and I didn't like them hanging from the bottom.
I have since cut into my bumper and flush mounted diffused SRQ2 lights.
Yes, I'm the same idiot who cut my 2013 FX4 grill to add the SR 30" bar on the top of the grill posted earlier in this post.
I also took the Duallys I previously had for reverse lights and mounted in my factory fog lights. (don't have a pic of this but everyone has seen these mounted like this)
The following 2 users liked this post by dannytexas:
2010_BlackBison (06-25-2014),
PlatinumCarioca (07-14-2014)
