101 ways to mount your Rigids! - Presented by TAP Auto and goneFXcrazy
#213
F150 Forum
iTrader: (3)
I installed one of these systems in my truck back before christmas. I also splurged and got the bluetooth remote control device. Now I can control all of my lights from my phone from about 20-30 feet away. I got the 'source' for 320, and ordered the switches from OTRATTW. I'll try to take pictures in the next couple of days to show my install. Basically though, the only mounting location for the source i could come up with was to mount it on the passenger side of the engine cover. That made it easy to run wires to the battery, and to come off of the fire wall for accessory harnesses.
Looks nice! Very clean.
The following users liked this post:
MCDavis (02-16-2015)
#214
Advanced Member
iTrader: (-1)
Did you ever get some pictures of the setup? I think many of us are curious to see
We are still working on getting something together, we will update as we have new information.
MCDAVIS, what fog bucket are you using here? Looks nothing like any F150 bucket I've ever seen
Looks nice! Very clean.
http://hackaday.com/2013/09/13/motob...ontrolled-pdu/
There is something like this, that is easy to hookup and you can buy quick disconnect cables.
#216
Member
Thread Starter
Mind sharing which aftermarket ones those are? Seems like a simple way of doing it.
#218
Senior Member
Bought 'em on Amazon. I knew that since I was going to cut them up that I didn't want OEM. I couldn't get them to bake open, so I got to cutting:
Amazon.com: Ford F-150 Pickup Truck 11-12 Fog Light Assembly RH USA Passenger Side=LH: Automotive
Amazon.com: Ford F-150 Pickup Truck 11-12 Fog Light Assembly RH USA Passenger Side=LH: Automotive
And I'm just not digging the square peg in a round hole, so there is a pair of JW Speaker fogs sitting at the house waiting for me if I ever get to go home from work! I'm thinking about losing the factory fog switch all together. Only problem is that per AK law, only 6 forward facing lights can be on at a time...
The following users liked this post:
RES4CUE (02-17-2015)
#219
Member
Thread Starter
You went a little further than I did ...I just drilled a hole in the bottom of the fog bucket after I took the housing out... And I'm just not digging the square peg in a round hole, so there is a pair of JW Speaker fogs sitting at the house waiting for me if I ever get to go home from work! I'm thinking about losing the factory fog switch all together. Only problem is that per AK law, only 6 forward facing lights can be on at a time...