When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone came up with a good way to mount the lights in a larait, limited or platinum grill? I have an ecoboost so I'm not sure if I did a E2 light in the grill if it would be enough air getting to the IC. The SR isn't that much less than a E2 so it doesn't seam worth it.
Has anyone came up with a good way to mount the lights in a larait, limited or platinum grill? I have an ecoboost so I'm not sure if I did a E2 light in the grill if it would be enough air getting to the IC. The SR isn't that much less than a E2 so it doesn't seam worth it.
Like [MENTION=99169]Butters_33[/MENTION] said, a 30" SR/SR2 will fit perfectly between the grille supports. I've seen it on several F150's up here, including the ones with grilles like yours. That's what I had planned until I picked up my brush guard.
Do it, do it. You will NOT regret it. Even better, use the SR-Q's AND the SR-Q2's! Call them tailgater justice lights!
heres a pict of the bracket..I am going to straighten them up and paint em flat black, just wanted to see how it worked out 1st...these brackets allow to completely conceal them under the bumper to about 3" lower
the rest are how they look behind the truck, then the backup camera 1st with crappy oem backups...then the ridgids....I can finally see to frippin back up at night!
You could probably aim a 10'', 20'', or 30'' SR through the holes on the bottom or top bar. Or in between the bars.
IMO a 20'' SR looks sleek in the bumper gap. It wouldn't obstruct the intercooler enough to cause damage. That's what I'd go with
Originally Posted by akmedic77
Like [MENTION=99169]Butters_33[/MENTION] said, a 30" SR/SR2 will fit perfectly between the grille supports. I've seen it on several F150's up here, including the ones with grilles like yours. That's what I had planned until I picked up my brush guard.
Ok thanks and I'll have to do some more measuring.
Here are mine for consideration
My whole set up is as follows
2 rigid dually floods outside (1550 Lumens)
2 rigid dually spots inside (1550 Lumens)
2 rigid dually d2 driving middle (3000 Lumens) (next to winch)
Lifetime LED Headlight beams (3600 Lumens)
2 rigid dually floods flush mounted in the rear bumper (1550 Lumens)
10-06-2014, 03:45 PM
