tag66

I have an 05 f150 xlt that i recently put tow mirrors on. My stock mirros were just power, the tow are power/heat/turn/puddle. When I was finished with everything, none of the lights work. I dont really care about the heat, but how can I make it so that the turn signal and puddle lights work?

06BigRed

For the turn you could run a wire to the front blinkers and for the puddle a wire to the dome light inside

tag66

ok cool, but what slots do i put the wires into where it plugs into the mirror?

06BigRed

Yeah pretty much just gotta play around with the plugs unless you already know which is which and I would probably try like a 12 gauge maybe a bit smaller

bpmarmstrong

I just did this you have to switch pins You move ground to slot #8. I don't remember what pin ground is. That is for turn signals to work.