Daleford

I want to add a trans cooler to a 2010 F150 XL that wasn't born with the tow package. I am used to adding the typical aftermarket cooler that all come with 3/8 inch rubber lines. The newer F-150 trans cooler lines are complicated and large [7/16 ??] going to the rad.
How do I do this???

seaeagle2

check out this thread, after poking around on the internet, I decided to use an oem style cooler,

https://www.f150forum.com/f82/added-...cooler-217865/

Daleford

Good stuff - THANKS
I just sent you a PM

tcp2

I have the basic tow package on my 09 with the oem cooler. I am looking to add a magnefine filter inline, but don't know if I should order a 3/8th or 1/2" inlet unit. Do you recall what the inlet size was on the oem cooler, or what ID the hose you used has? thanks for any info.

13f150plat

iTrader: (1)

was told by a reputable company that the f150 cooler you can replace with the f250 super duty cooler and its a bigger/better design and bolts right in/on ...

more cooling abilities... and factory ford parts

tcp2

The transmission coolers on our 2011 f-350 6.2 trucks are different and mounted completely differently.

13f150plat

iTrader: (1)

was told they are bigger and will work ..
worth the looksie to me ... would rather stick with ford parts and have it look clean install
rather then cut and clam things