Go Back   Ford F150 Forum - Community of Ford Truck Fans > Ford F150 Forums > Towing/ Hauling/ Plowing
Sign in using an external account
Register Forgot Password?


Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 08-05-2014, 09:09 PM   #1
Junior Member
 
Join Date: Aug 2014
Posts: 4
Mentioned: 0 Post(s)
Thanks: 0
Thanked 0 Times in 0 Posts
Feedback Score: 0 reviews
Default Front End Wandering

Hello all, I am new to this forum and have found it to be a great resource, I guess now I need your help. Towing speeds above about 50mph it feels like the front end wants to wonder and I am constantly making corrections. Sometimes it almost feels like it is pulling to one side. I am running a weight distro hitch and an anti-sway, I will try and attach some pics for your critique. My tow vehicle is a 2013 F150 lariat 4x4 Ecoboost with a 9,500 tow, 15,700 max weight truck trailer occupants, 3,750 front axle, 3850 rear axle. I just got back from the cat scales and these were my numbers front axle 3,320, rear 3,500, trailer 6,460, total weight all together is 13,280. C rated tires at 35psi, but they say on the sidewall they can be ran at 50psi. I am towing a 2013 Aerolite 33' super slide. I sag about an inch and a half. Any suggestions would be greatly appreciated. You can see pics of the hitch set-up here http://www.f150forum.com/g/picture/1619199

Last edited by jscheelar; 08-05-2014 at 09:44 PM. Reason: mis-spelling
jscheelar is offline   Reply With Quote
Old 08-06-2014, 11:04 AM   #2
Senior Member
 
Join Date: Aug 2013
Location: Southern Michigan
Posts: 212
Mentioned: 0 Post(s)
Thanked 16 Times in 16 Posts
Feedback Score: 0 reviews
Default

I would run those tires at 50psi while towing. Try it, soft sidewalls for the load feel that way. Make sure trailer tires are close to max. Tire charts will give you needed air pressure for load, but I've never had a problem with max pressure while towing.

I like michelin MS2's light truck tire at around 60psi. Feels rock solid.
raisin is offline   Reply With Quote
Old 08-06-2014, 12:15 PM   #3
Senior Member
 
xcntrk's Avatar
 
Join Date: Nov 2013
Location: NOVA
Posts: 512
Mentioned: 5 Post(s)
Thanked 89 Times in 73 Posts
Feedback Score: 0 reviews
Default

Do you have the scaled unloaded weights of the truck to compare the loaded numbers against? For example 3320 front axle loaded with trailer and WD is how far off from unloaded front-end weight?

Also it's hard to tell in that picture, but I don't see any sway control, just load distribution bars and attachment ****** up chains. Is there a friction or shock/stabilizer on one side of the trailer hitch? What kind of WD system is it? Also, that's a pretty big trailer for an inferior sway control system (such as shock based).
__________________
2013 FX4 SCREW 145" WB, TUXEDO BLACK, ECOBOOST V6, MAX TOW PKG 11200#, BILSTEIN 5100 (1.75"), FIRESTONE RIDE RITE BAGS, 285/60/20 DURATRACS.

Last edited by xcntrk; 08-06-2014 at 12:18 PM.
xcntrk is offline   Reply With Quote
Old 08-06-2014, 01:10 PM   #4
Flatlander
 
smurfs_of_war's Avatar
 
Join Date: Aug 2010
Location: Saskatchewan
Posts: 2,066
Mentioned: 1 Post(s)
Thanked 252 Times in 178 Posts
Feedback Score: 0 reviews
Default

Just a guess based on the numbers you provided- I think your front axle is light. With occupants and a loaded trailer with a properly adjusted WDH, it will likely come pretty close to the GAWR I'd bet.

*This is just a guess since the last two half tons I have towed with have been this way- I could be wrong so take it for what it's worth.
__________________
I drive a goat now...
smurfs_of_war is offline   Reply With Quote
Old 08-06-2014, 11:38 PM   #5
Senior Member
 
Join Date: Nov 2013
Posts: 110
Mentioned: 0 Post(s)
Thanks: 0
Thanked 14 Times in 12 Posts
Feedback Score: 0 reviews
Default

Pump tires up to 45 psi, adjust WDH so that truck and trailer each sit level but not level with each other.
Boulevard is offline   Reply With Quote
Old 08-08-2014, 12:20 AM   #6
Junior Member
 
Join Date: Aug 2014
Posts: 4
Mentioned: 0 Post(s)
Thanks: 0
Thanked 0 Times in 0 Posts
Feedback Score: 0 reviews
Default

Ok, so I went and did some adjustments. I measured 37.5 all around front and back while hitched. This was after dropping the hitch another inch and adding two spacers. Just wondering if bags or timbrens may help. I am on the brink of just getting a bigger truck at this point
jscheelar is offline   Reply With Quote
Old 08-08-2014, 09:50 AM   #7
Senior Member
 
Join Date: Dec 2013
Posts: 1,024
Mentioned: 1 Post(s)
Thanked 132 Times in 114 Posts
Feedback Score: 0 reviews
Default

Quote:
Originally Posted by jscheelar View Post
Ok, so I went and did some adjustments. I measured 37.5 all around front and back while hitched. This was after dropping the hitch another inch and adding two spacers. Just wondering if bags or timbrens may help. I am on the brink of just getting a bigger truck at this point
Bags or timbrens won't help you get more weight to the front axle, which it sounds like you need. Did you take it for a test run after making your adjustments to your WDH?
king nothing is offline   Reply With Quote
Old 08-08-2014, 04:52 PM   #8
Senior Member
 
willieboy's Avatar
 
Join Date: Aug 2012
Location: Tomball/Spring/The Woodlands, TX
Posts: 347
Mentioned: 0 Post(s)
Thanked 38 Times in 35 Posts
Feedback Score: 0 reviews
Default

I think your big issue is the tires. Air those things up to the max and go give it a tug. My guess is it will be much better.

As for weight on the front end, we need the measurements before and after hitching. I would guess you are a little light on the front, but hard to tell till we see all the measurements.
__________________
WillieBoy
New Truck:
2014 F350 Lariat SCrew Shortbed, 4x4, Powerstroke
Previous Truck: 2013 F150 Lariat SCrew MaxTow HD Payload, 4x2, EcoBoost
willieboy is offline   Reply With Quote
Old 08-08-2014, 07:33 PM   #9
Senior Member
 
Join Date: Aug 2013
Location: Southern Michigan
Posts: 212
Mentioned: 0 Post(s)
Thanked 16 Times in 16 Posts
Feedback Score: 0 reviews
Default

Lots of people including me use that same truck to pull that weight no problem. As said may need light truck tires to get rid of sidewall flex. General info measure distance from ground to bottom of front and rear bumper before hookup. Adjust hitch till front and back of truck drop the same when hooking up. Hitch head tilt has effect on hitch bar adjustment.

When I pull the same weight I relax, use one hand on the wheel until I see that truck or bus, then 2 hand it. Worked for 40K of towing. I use one friction sway control.

Last edited by raisin; 08-08-2014 at 07:36 PM.
raisin is offline   Reply With Quote
Old 08-08-2014, 07:33 PM
 
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Join F150 Forum

 

The Mustang Source
All times are GMT -4. The time now is 04:33 AM.


Copyright 2006 - 20011 F150forum.com
This site is in no way affiliated with the Ford Motor Company.