F150 Power Fold Tow Mirrors are in the works
#293
Senior Member
Ahh, ok, thanks Tony. Just was hoping to see what I might be in for beforehand. I'll wait for a few "guinea pigs" and see the response here.
The following users liked this post:
Oldsmuggler (09-17-2014)
#294
1A Auto Parts
Thread Starter
All of these mirrors are in our Kansas warehouse, I'm in MA. So I can't run to the warehouse and take any pics. This product is very new to us; I typically wait until we have pictures to post our Ads, but I wanted to give you guys first shot at buying them.
The following users liked this post:
scole (09-15-2014)
#295
Ill be ordering these for my 2013 XLT once i see a picture. After reading all the install threads; hopefully i can get them working with a new switch and a few wires. How are you guys running the wires from driver to passenger sides? I havent yet looked to see how it is done but i figured id ask anyway? Also, my truck has the power adjust driver seat, do i need a new switch to power fold the mirrors (i have heard that these two options sometimes come together - my current switch does not say "fold/unfold" on it so i assumed i needed a new one)??
Last edited by Seapickle; 09-15-2014 at 04:31 PM.
#296
1A Auto Parts
Thread Starter
Ill be ordering these for my 2013 XLT once i see a picture. After reading all the install threads; hopefully i can get them working with a new switch and a few wires. How are you guys running the wires from driver to passenger sides? I havent yet looked to see how it is done but i figured id ask anyway? Also, my truck has the power adjust driver seat, do i need a new switch to power fold the mirrors (i have heard that these two options sometimes come together - my current switch does not say "fold/unfold" on it so i assumed i needed a new one)??
#297
Let me rephrase, i know i will have to run a few wires, i just hope it all goes well and it works. Ill most definitely have to buy the switch and change that too. My only remaining question is getting the wired from one side to the other. I was hoping someone who has done this can answer that. Thanks
#298
1A Auto Parts
Thread Starter
Let me rephrase, i know i will have to run a few wires, i just hope it all goes well and it works. Ill most definitely have to buy the switch and change that too. My only remaining question is getting the wired from one side to the other. I was hoping someone who has done this can answer that. Thanks
Waiting to hear back from our supplier, so I can guy you guys a good answer.
Tony
The following users liked this post:
scole (09-15-2014)
#299