Brake controller harness question
#1
Brake controller harness question
Recently purchased used 2011 F150. Has the tow harness and in the glove compartment was a bag 9L3T-15A416-AD with jumper harness 9L3T-14A348-A and a relay and Fuse(?). Problem is the jumper harness does dot fit the 14-way wiring connector under the instrument panel. The jumper harness casing is same size as 14-way wiring connector casing.
Can anybody tell me what's wrong?
Thanks
GWHF150
Can anybody tell me what's wrong?
Thanks
GWHF150
The following users liked this post:
GWHF150 (06-08-2014)
#3
Senior Member
Recently purchased used 2011 F150. Has the tow harness and in the glove compartment was a bag 9L3T-15A416-AD with jumper harness 9L3T-14A348-A and a relay and Fuse(?). Problem is the jumper harness does dot fit the 14-way wiring connector under the instrument panel. The jumper harness casing is same size as 14-way wiring connector casing. Can anybody tell me what's wrong? Thanks GWHF150
That's for aftermarket TBC only.
You should just plug harness from the dash into TBC and yes there may be a plug on harness you have to pull off before putting TBC.
#5
Junior Member
Join Date: Jun 2014
Location: Mississauga,Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
brake controller
need to install a brake controller in 2011 f150 where's the best place to put it . because in my old minivan i had a habit of hitting it with my knees
#6
Senior Member